Atlanta CCTV Camera: Kidde i4618 Firex Hardwire Ionization Smoke Detector with Battery Backup

Price : $12.50
List Price : ~~$19.74~~
You Save : $7.24 (37%)

Product Description

Amazon.com Product Description
The Firex i4618 Hardwire Smoke Alarm by Kidde is an ionization smoke alarm that operates on a 120V power source with 9V battery backup. The Firex i4618 smoke alarm gives a lot of advantages for installers and home owners, such as its painless-access slide load front battery door.
This alarm is powered by your home’s electricity and will interconnect with other smoke alarms in your residence. Professionals recommend interconnected alarms, considering that when a single sounds, they all sound, providing an early warning against fire by significantly growing your capacity to hear an alarm anyplace in your residence, regardless of exactly where the fire begins.
This alarm uses ionization sensing engineering. Ionization sensing alarms may possibly detect invisible fire particles (connected with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may perhaps detect visible particles (related with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the a variety of sorts of fire that can take place inside the dwelling.

Firex i4618 Hardwire Smoke AlarmUser-Friendly Capabilities

Simple and easy access slide load front battery door
Battery backup offers protection in case of a power failure
Interconnectable with up to 24 devices (of which 18 can be initiating) such as smoke, CO and heat alarms

Slide load front battery door provides very easy access for altering battery backup. .
The i4618 smoke alarm offers very easy installation features. .
Delivers the recommended protection of an interconnected technique. When one particular alarm goes off, they all do. .
Simple and easy Installation

Front battery pull tab enables battery activation without the need of removing alarm from mounting bracket.
Substantial mounting base tends to make mounting less complicated, protects surface paint from dirt and covers imperfections.
Pre-stripped wiring harness with simple and easy off cap does not call for stripper tool. Tinned strands boost conductivity and wire nut grip.

Fewer Callbacks

Big centrally situated Test/Hush¨ alarm manage button.
Dust cover protects sensor from contaminates for the duration of construction lowering nuisance alarms.

User Friendly Features

Simple access front loading battery door.
Battery backup provides protection in case of power failure.
Interconnectable with up to 24 devices (of which 18 can be initiating) such as smoke, CO and heat alarms. See user’s guide for complete instructions.

Interconnectable for Enhanced SafetyFire and consumer professionals advocate interconnected alarms for added protection. According to the National Fire Protection Association (NFPA), most Americans feel they are even more at danger of getting a victim of a tornado than of a residence fire. Truly the opposite is correct. Fires are extra widespread than any other disaster that strikes a household at property, and can grow to be deadly in minutes.
You have on common much less than 3 minutes from the time you hear a smoke alarm to escape a fire. The sooner you hear an alarm, the sooner you can get out safely. Smoke alarms that link together so that when a single goes off, they all go off, are called interconnected alarms. These alarms offer extra warnings in far more places, giving your household a lot more time to escape a house fire. Houses built just after 1993 are necessary by making codes to have interconnected alarms that are wired into their electrical method.
Interconnects with Other DevicesInterconnects with all Kidde, Firex, Fyrnetics, Lifesaver and Nighthawk alarms, strobe lights, and relay modules with interconnect functionality.
Trademarked Hush Feature for ConvenienceBy pressing the Hush button, you can quickly and safely silence nuisance alarms triggered by non-emergency situations, such as overcooked dinners.
This alarm's Intelligent Hush function has the capability of temporarily desensitizing the alarm circuit for up to 8 minutes. This feature is to be made use of only when a known alarm situation, such as smoke from cooking, activates the alarm. The smoke alarm is desensitized by pushing the Test/Hush button on the smoke alarm cover. If the smoke is not as well dense, the alarm will silence promptly. The red LED will illuminate for 1.5 seconds just about every eight seconds whilst in hush. This indicates that the alarm is in a temporarily desensitized condition. The smoke alarm will automatically reset immediately after approximately 8 minutes and sound the alarm if particles of combustion are nevertheless present. Sensible Hush can be utilized repeatedly until the air has been cleared of the situation causing the alarm. Pushing the Test/Hush button on the alarm will finish the hush period.
Dependable 9-Volt Battery Backup, Indicator LED, and Test FeatureBecause a smoke alarm only helps guard you if it is operating, this unit characteristics a red LED that flashes every 30 to 40 seconds to indicate that it is operating properly. For extra peace of thoughts, the alarm also contains a test/reset button that enables you to periodically test its circuitry and horn.
The alarm’s normal 9-volt battery delivers continuous protection against smoke and fire hazards, even for the duration of power outages. The unit delivers a low battery warning that troubles a short chirp just about every 30 to 40 seconds for at least seven days just before losing power, letting you know that it is time to adjust the battery.
The unit measures just 5.6 inches in diameter and 1.8 inches deep, and it characteristics a neutral, white finish. It consists of tamper resist features to deter vandalism or theft.
This alarm is UL listed, so you can be confident of its good quality, and it is backed by a 5-year limited warranty.
About Kidde: A UTC Fire Safety Brand Renowned for worldwide leadership in fire detection and suppression, Kidde delivers solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems.
Kidde is a UTC Fire Safety brand, with a history that is wealthy with innovations, from the patent of the Chubb Detector Lock in 1818 to the improvement of the world's initially wireless networked smoke detectors in 2004.
What is in the BoxOne i4618 ionization smoke alarm with mounting bracket and mounting hardware, one particular 9 volt battery, a five-year limited warranty and a bilingual user's manual.

The 120 volt Firex 4618 Pro Basic smoke detector has an ionization Sensor, quick connect power harness, is multi-station interconnectable, has a five year warranty, and is not out there to members in Iowa, Oregon Or Vermont.
See all Item Description

Customer Evaluations

My home was built in 2001, and it was equipped with Firex 120-1072B units in every single room wired for interconnectivity. One particular of my units began to sound randomly even when there was no fire. I attempted changing the battery, but I nevertheless had the exact same results. So right after looking web based, I discovered that the Kidde i4618 is the present replacement model.
Right after acquiring the model, I was hoping that I could use an adapter among the wiring in my Firex unit and the Kidde. But, I discovered that I was mistaken in what I thought I had read. I am about as unhandy a man as they come, and I genuinely wasn't seeking forward to rewiring for the new unit. The hardest element of the procedure turned out acquiring the appropriate breaker as mine are not labeled. At least for my house (please know that yours may very well nicely be several), the smoke detectors had been on a dedicated breaker. When I found it and switched it off, it was incredibly hassle-free from there. I removed the two screws from the bracket of the Firex unit and then uncapped the wires. The Firex wires were quick to get rid of. I rewired black, white, and red as indicated and put the yellow caps back on to cover the wires. Then it was a rather simple matter of screwing in the new mount, connecting the wire, and twisting the Kidde unit into spot. When I flipped the breaker back on, anything was back to regular.
There is 1 good issue on these new units. The battery door is on the face of the unit rather than the back. The old Firex unit has the battery in the back, and it was a discomfort to replace the battery. Another nice improvement of the Firex unit is the power connector is significantly less difficult to plug and unplug with no becoming insecure.
So if this is the replacement for your old Firex smoke alarm, do not hesitate to get this a single from Kidde. I'm pleased with the outcomes, and I think you will be also. Please really feel zero cost to ask queries in the comments section below.

We moved into a house that was built back in 1985. Along with a multitude of other little fixes and updates that needed doing, I noticed that the upstairs smoke detector was searching a little loose on the ceiling. Upon giving it a twist, the bracket broke, and the detector subsequently hung in a jaunty, festive way from just the wires. And I noticed that this was the ORIGINAL smoke detector, dated from 1985. Okay, there is one more issue needing replaced.
Installation was a breeze - cut the power, pull the old a single, match the appropriate wires on the harness (white/white, black/black, red/red), screw in the new mounting bracket, plug it in, lock it in spot, turn the power back on.
BZZZZZZZZZZZZZZZZZZZZZ / BEEEEEEEEEEEEEEEEEEEEP!
Oops! The 2010 model smoke detector didn't want to play well with the other 1985 smoke detector that I hadn't even observed downstairs, and they were both going off simultaneously. Okay, swap that 1 out as well, and... blissful silence, and a comforting green light shines from each one.
Trust me: if I could install this, Any one can install this. I can not even hammer a nail straight.